If you’re looking for someplace to purchase metal spandrel and ceiling system in the Philippines, it is best to check roofing suppliers such as DN Steel. Primarily, the spandrel roof is made from a pre-painted metal sheet or PVC materials.
Spandrel has a functional beauty for a perfect finish on eaves, ceilings, and shades. The most common material utilized in spandrels is steel, and often, steel companies deal with the same type of material. Along these lines, it is common for them to supply these materials.
Different Types of Spandrel
The spandrel and ceiling system can typically have any number of lengths with two possible widths (4’ and 6’). For design, it can be ribbed, ridged, and plain. For instance, a 4’ ribbed spandrel can have vents penetrated on them. Another design can have a 6’ ridged type spandrel without vents.
Choosing the Best Spandrel and Ceiling System
They are typically comprised of various materials. The regular ones are aluminum, steel, vinyl, and wood. In the Philippines, the most well-known one is steel because of its benefits and availability in the market. Thus, it is a practical choice for a ceiling system.
As what has been referenced, you may get spandrel with or without vents. You can get both for your roof space as both types offer benefits. The one with vents provides better airflow. However, as a downside, small insects can pass through the holes. Hence, it is recommended to have a vented spandrel for every three plain ones.
To get the prime number required to cover the eaves, separate the length of the region to the width of the material. For instance, we have an area of 3 meters to cover. With a 6’ spandrel (approximately 0.15 meters), you can divide it. Thus, you’ll need 20 pieces of 6’ to cover the area.
What is a Spandrel and Ceiling System?
In the Philippines, it is known as spandrels; however, another term for it is soffits. The word originates from the French phrase, “something fixed underneath.”
In the exteriors of the home, and at the edge of the roof, it’s most likely that soffits are installed. This spandrel is typically installed at the eaves of your ceiling system. However, the installation can even extend to ceilings inside of a structure.
The primary purpose of the spandrel or soffits is both for aesthetic and functional aspects of the ceiling system. Aesthetic, because it covers the excess area of the rafters. Because of this, it can significantly enhance the appearance of the structure by merely enclosing it with metal spandrels complemented with an attractive design and color.
As for its functional aspect, the spandrel and ceiling system can improve the circulation of airflow. For wood rafters, these can avoid mold from forming around your roof. On the other hand, installing metal C-purlins can gradually reduce rust formation.
Advantages of DN Steel’s Spandrel and Ceiling System
The spandrel and ceiling system by DN Steel can be formed out of different materials. The most common ones are aluminum, vinyl, and wood. However, in the Philippines, the top choice is a steel-based ceiling system.
Let us discuss the advantages of using a steel Spandrel and ceiling system.
- Incredibly Durable – they are resistant against moisture due to the metal properties
- Non-Combustible – in case of a fire, they are nearly fire-resistant
- Easy to Clean – the accumulated dirt can be easily rinsed off by running water
- Customizable – can be manufactured with different colors and designs
- Popular – easily accessible to the market by steel roofing suppliers
- Water Resistant – does not deteriorate when splashed with water
- Easy Installation – can be easily installed as it’s lightweight
How to Install the Spandrel and Ceiling System?
Check the Roof First
Before installing the spandrel and ceiling system, ensure that the roof is free from potential leaks and damages. It will be best to double-check any mistakes made by the roofer before enclosing it. Additionally, it would be challenging to examine leaks as soon as the eaves are covered.
Install the End and Center Moldings
Short spandrels need a supporting frame or channel for the installation process. Typical lengths of spandrels are short and are commonly applied to eaves and edges of the roof. That is why installing the frame is the initial step before actually placing the spandrels and ceiling system.
The frame is usually made out of the end and center moldings. They fill in as a supporting component where the spandrels are placed on top of them. For end moldings, they are fastened together with a facia board through the use of screws. For center moldings, they are installed at the ridges.
Embedding and Lapping the Spandrels
When the frame is complete, insert the spandrel between the two end moldings. Piece by piece, lap them with one another. For spandrels close to a center molding, it will be necessary to cut it for it to fit and cover the space.
Summary
- Seamless integration with other SAS metal ceiling systems
- Highly durable and impact resistant
- Simple with low maintenance
- Variety of size, shape and colored panels (RAL)
- Minimum 20-year product life expectancy
Standard Panel Shape
The spandrel and ceiling system can be of any shape and curve if desired, depending on the specification and desired look. If you want to have it on specific forms or add any significant manufacturing complexity, they will come at a premium.
DN STEEL ROOFING produces quality materials for your spandrel and ceiling system as a major steel manufacturing catering to the construction industry. It continues its commitment to perfect its craft in this trade.
For more information on the bespoke spandrel and ceiling system, please contact us here at DN Steel.